Keith Baxter: Submersible

แสดงบทความที่มีป้ายกำกับ Submersible แสดงบทความทั้งหมด

วันศุกร์ที่ 6 เมษายน พ.ศ. 2555

Best Buy Flotec FP3212 3-Wire Submersible Well Pump

For average yield wells with average household use All 1-1/4 inch NPT Can pump to depths of 500 26 gallons per minute capacity Requires control box FP217-810 (2030-2030) or FP217-812 (2030-2048) Cast iron discharge connection, includes built-in check valve, provides smooth water passages for maximum efficiency Stainless steel pump shaft is precision ground for exact bearing fit and straightness Precision molded impellers and diffusers For 3-wire 4-Inch submersible well pump FP3212 (2030-2022) Houses electrical components for easy service 230-Volt 1/2 HP Includes control box

Visit: Save Sta-Rite Cast Iron Submersible Sump Pump .5 HP PCD-10B

Save 10000gph 1.5hp Stainless Steel Submersible Water Pump

APPLICATION:

-- Dewatering Construction sites, mines

-- subways, tunnels, civil engineering

-- Utilities

-- Decorative fountains, waterfalls, and fish ponds

-- Residential, commercial wastewater discharge.

SPECIFICATION:

POWER: 1.5HP, 115V/60HZ, 15 Amp, Single Phase Motor full load

SPEED: 3450RPM (nominal)

DISCHARGE: 2" NPT SIDE

SOLIDS HANDLING: Screen Size

CAPACITIES: Up to 10000 GPH Max.flow

HEAD SHUTOFF: Up to 40 ft.

PERFORMANCE: GPM@FT: 150@5ft, 136@10ft, 119@15ft, 97@20ft, 66@25ft, 52@30ft, 31@35ft, shutoff@40ft

AMBIENT TEMP: 104F (40C) Continuous 140F(60C) Intermittent

PUMP CASING: 304 Stainless Steel

MOTOR HOUSING: 304 Stainless Steel

SEAL PLATE: 304 Stainless steel

IMPELLER: Semi-open, ABS

SHAFT: Corrosion resistance stainless steel Keyed at the end

O-RING: BUNA-N, assures positive sealing against oil leakage.

HARDWARE: 300 series stainless steel.

MECHANICAL SEALS: 300 S.S. metal parts, BUNA-N elastomers. Silicon Carbide VS Ceramic

CABLE: Water proof 30 ft. Cord.

ENTRY: Pressure grommet for sealing and strain relief.

MOTOR: Squirrel Cage Induction, Single Phase, 2 Poles, Air filled, 115V/60Hz, 1.5 Hp, Permanent Split Capacitor Type, Built-in Thermal Protector, with automatic reset.

Dimension: 7.8" Dia. X 16.2" H.

Shipping weight: 33 lbs

OPTIONAL: Piggy back ball float switch. Stainless steel construction, rusted free light body, heavy duty 1 year manufacturer warranty salt water application available easy installation

Visit: OrderNow Vigo Industries VG02007STK2 PullDown Kitchen Spray Faucet, Steel

วันพฤหัสบดีที่ 5 เมษายน พ.ศ. 2555

New Liberty Pumps LE41A 4/10-Horse Power 2-Inch Discharge LE40-Series Submersible Automatic Sewage Pump

Liberty Pumps LE41A is a 115V 4/10HP Automatic/Manual Submersible Sewage/Effluent Pump with 10ft quick-disconnect power cord. This Liberty Pump is controlled by an adjustable, mercury-free, wide angle float switch. The turn-on level is approximately 12" to 16" above the bottom of the basin. The turn-off level is approximately 6" above the bottom of the basin. Other pumping differentials may be obtained by tethering the switch cord to the discharge pipe. NOTE A minimum cord length of 3.5" from the tether point to the top surface of the float is required for proper switch operation. If using a differential other than the factory setting, be sure when the pump shuts off at least 6" of fluid is left in the basin so the impeller remains submerged.The switch cord is equipped with a series (piggyback) plug, that allows for manual operation of pump separate from switch. For manual operation, or in the event of switch failure, the pump cord can be separated and plugged into the electrical outlet, directly bypassing the switch. CAUTION Do not let the pump run dry.Heavy-duty built and reliable, Liberty Pumps LE40-series is the perfect choice for residential sewage applications.Liberty Pumps LE41A have 19' Shut-off Head, 2" FNPT Discharge and a corrosion resistant VORTEX style impeller capable of passing a 2" spherical solid. The pump motor is oil filled, thermally protected. The rotor shaft is made of 416 stainless steel andis supported by lower and upper ball bearings. Quick-disconnect power cord allows replacement of cord in seconds without breaking seals to motor. Pumps up to 143 GPM Maximum discharge head of 20-Foot Oil filled, thermally protected motor VORTEX style impeller capable of passing a 2-Inch spherical solid Quick-disconnect 10-Foot standard power cord allows replacement of cord in seconds without breaking seals to motor

Visit: Save Alabaster Dust ENERGY STAR 24 Wide Bathroom Wall Light